Youle 1,600-Meter Remote-Control Dog Trainer (One Unit Controls Two Dogs)

I. Product Overview

This product is the YouLe Remote-Controlled Dog Training Collar. It features three training modes—beep, vibration, and electric shock—to help correct undesirable behaviors such as barking, lunging at people, and running off; it comes with a built-in high-intensity LED light and is IPx7 waterproof, making it suitable for indoor, outdoor, and nighttime training.

⚠️ Important Notice: This product is intended solely as a behavior training tool and must not be used to abuse animals; it is not recommended for puppies under 8 weeks of age, frail dogs, dogs with heart conditions, or pregnant dogs.

II. List of Parts

1. Remote Control Transmitter
2. Collar Receiver
3. Metal Contacts (2 sets)
4. Silicone protective cap (soft sleeve, reduces irritation)
5. Charging cable
6. Instruction Manual

III. Product Specifications

• Transmitter battery capacity: 300 mAh
• Receiver battery capacity: 350 mAh
• Standby time: Up to 200 days
• Water Resistance Rating: IPx7
• Adjustment Levels: Electric shock: 0–100 levels (two modes: momentary and continuous); buzzer and vibration have fixed levels and cannot be adjusted
• LED Light Modes: Constant On / Strobe / SOS Emergency
• Safety Protection Mechanism: If the transmitter is triggered for more than 10 seconds at a time, it automatically stops outputting; if the receiver is triggered 20 times in a row, it automatically enters protection mode and pauses the electric shock output.
• Certifications: CE, RoHS, FCC, UN38.3, MSDS; electric shock compliance with ECMA international standards

IV. Installation and Wear

1. Install the Contact Head Choose the appropriate accessories based on the thickness of your dog's coat: For long-haired dogs, install metal contacts; for short-haired dogs, use silicone protective caps to reduce pressure on the skin. Screw the contacts securely onto the bottom of the receiver.
2. Wearing a Collar The collar should be loose enough to fitOne fingerIt should be snug—not too tight, which could cause skin irritation, nor too loose, which would prevent the contact points from touching the skin.

Recommendation: Remove the device every 2 hours and rest for 30 minutes; do not wear it for more than 8 hours a day to prevent pressure sores.

V. Charging Procedures

1. Slide open the dust covers on the charging ports of the transmitter and receiver, respectively, and connect the charging cable;
2. The indicator light turns on during charging and changes color when fully charged;
3. After charging is complete, unplug the charging cable and replace the dust cap;

Note: For first-time use, we recommend fully charging the device before use; if the device will not be used for an extended period, recharge it once every 3 months.

VI. Button Functions and Usage Instructions

Remote Control Buttons

1. Buzzer Button: When pressed, the receiver emits a beep as a warning signal; this mode should be used as the primary training mode.
2. Vibration Button: Press this button to make the receiver vibrate, alerting your dog—the top choice for gentle training.
3. Shock Button: Categorized as momentary or continuous electric shocks; adjustable from 0 to 100.

✅ Guidelines for Use:Start by trying the lowest setting, find a setting that’s just enough to get your dog’s attention without causing pain; never use a high setting directly.

4. Light Switch: Press briefly to switch between constant-on, strobe, and SOS emergency light modes—ideal for nighttime dog walks and search-and-rescue operations.

Training Procedure (Recommended)

1. First, useBuzzing: When the dog exhibits undesirable behavior, press the buzzer and verbally give the “No” command;
2. If there is no response, switchVibrationEnter the password;
3. If the buzzer or vibration does not work, try again.Low-level electric shock; As soon as the dog stops the undesirable behavior, release the button; once the dog obeys, reward it with a treat.

Do not hold down the shock button for an extended period of time; try to limit each shock to 1–2 seconds.

VII. Safety Precautions

1. Time-out protection: If you hold down the shock button for more than 10 seconds, the transmitter automatically cuts off the shock output; release the button to reset;
2. Shock Limit: If the receiver triggers 20 consecutive shocks, the shock function automatically locks. You must wait a certain amount of time for it to reset, to prevent overstimulation of the dog.

VIII. Waterproofing Instructions

Both the transmitter and receiver are IP67 waterproof and can be used in the rain or while swimming in shallow water. ❌ Do not: submerge in hot water, hot springs, or seawater for extended periods; be sure to wipe any moisture from the device’s surface before charging.

IX. Troubleshooting Common Issues

1. When I press the button, the collar doesn't respond.

• Check that the transmitter and receiver have sufficient battery power; make sure they are paired; check that the contact points are touching the dog's skin—thick fur can block the signal.

2. If your dog develops red spots on its skin, stop using the product immediately! Remove the collar and check to see if the contact points are too tight; attach silicone caps and reduce the wearing time. In severe cases, stop using the product and seek veterinary care.
3. The light does not turn on. Check the remote control's battery level and make sure the light button is working properly.

X. Important Notes

1. The purpose of training is to guide, not to punish. When your dog obeys a command, be sure to praise them verbally and give them a treat.
2. Do not apply electric shocks for extended periods, and do not use this device on people.
3. Check the condition of the skin where the collar comes into contact on a regular basis.
4. Store in a cool, dry place, away from high temperatures.