78L Large-Capacity Smart Fully Automatic Cat Litter Box
Brand: Yuli Youchong
Suitable for cats weighing: 1–10 kg
How to Use: Buttons on the device + remote control via the mobile app
Main Material: Food-grade ABS plastic
This fully automatic smart litter box is a smart litter-cleaning device designed specifically for cat owners. It combines automatic litter removal, automatic odor containment, anti-pinch safety features, quiet operation, and smart monitoring—all in one—to completely free up your hands. Featuring a sleek, rounded "space capsule" design, it boasts an attractive appearance that complements any home décor while effectively preventing odors from escaping—say goodbye to cat litter odors in your home.
The device uses a dual-sensor system combining gravity and infrared detection to accurately detect when cats enter and exit, preventing accidental pinching or misoperation. After the cat finishes using the litter box and leaves, the system automatically cleans with a delayed start, sifting out clumps of feces and urine. Clean litter is automatically returned to the tray, while waste falls into a sealed waste compartment, locking in odors and ensuring a clean, hygienic environment. The extra-large litter box space ensures comfort for all cats—from chubby cats to kittens and adult cats alike. Paired with a front litter-dispelling footplate, it significantly reduces litter spillage onto the floor, keeping the area clean.
The unit operates quietly and runs slowly and smoothly, so it won’t startle your cat. It supports both manual button operation and smart control via a mobile app, and visually tracks your cat’s litter box usage, helping owners stay informed about their cat’s health at all times. It’s an essential smart device for modern cat owners.
- Product Details
- Instructions for Use
Nine Core Features
- Open-style low entrance The entrance is low and gentle, allowing kittens, senior cats, and overweight cats to come and go easily, lowering the threshold and reducing the risk of bumping into things when entering or exiting.
- Safety Structural Design Multiple safety mechanisms prevent cats from getting pinched and guard against accidental contact. The device automatically stops operating when a cat is inside the chamber, ensuring the cat’s safety and eliminating the risk of accidents.
- Dual Deodorization A powerful odor-eliminating system that quickly breaks down the odor of cat waste, prevents the spread of unpleasant smells, keeps the air in your home fresh, and eliminates the smell of cat litter throughout your home.
- Gravity Sensing High-precision gravity sensing accurately detects when your cat enters or exits. The cleaning cycle begins only after your cat has left, preventing false triggers and ensuring more reliable operation.
- Automatic Cleanup After the cat finishes using the litter box, it automatically cleans and bags the litter, eliminating the need for daily manual scooping and truly freeing up the owner’s hands.
- Multi-Cat Recognition Supports use by different cats, with separate tracking of each cat’s litter box usage data, making it easy to monitor the health of each cat—ideal for multi-cat households.
- APP Remote Control With just one tap on the mobile app, you can remotely control the device, view your cat’s bathroom records anytime, anywhere, monitor bathroom frequency, and promptly detect any health issues.
- Easy to clean The modular design ensures there are no hard-to-clean areas. It is easy to assemble and disassemble, convenient to rinse, requires minimal daily maintenance, and is resistant to bacterial growth.
- Suitable for a variety of cats Suitable for cats of all sizes and breeds, from kittens to full-grown cats—one unit meets the needs of all the cats in your household.
💡 Use Cases
For office workers, renters, multi-cat households, and senior cat owners—solve the problems of litter box odors and frequent litter changes.
I. Product Overview
This product is a fully automatic, smart, enclosed litter box that combines automatic litter cleaning, odor control, safety features, and smart monitoring. The device automatically detects when a cat enters or exits; after the cat leaves, it automatically cleans up waste and separates the clean litter, enabling unattended cleaning. The built-in health tracking feature records the number of times and duration of each bathroom visit, allowing owners to easily monitor their cat’s daily health. The spacious design accommodates cats of most sizes, making it ideal for everyday household use.
II. Scope of Application
Suitable for people weighing 1.5 kg–10 kg Suitable for cats of all ages—kittens, adult cats, and overweight cats.
III. Safety Precautions (Must Read)
-
Do not use this product on kittens under 6 months old or cats weighing less than 1.5 kg to prevent pinching or entrapment.
-
If your cat is sick, recovering from surgery, or has limited mobility, please pause the automatic mode and switch to a regular litter box.
-
Be sure to turn off the power before cleaning, moving, or servicing equipment. Never reach into the operating chamber with your hands or tools.
-
Supports onlyBentonite Cat Litter, Blended Cat Litter; Do not use pine sand, crystal sand, or coarse-grained sand to prevent machine jams.
-
Place the equipment on a flat, hard surface, away from water sources, direct sunlight, curtains, and other objects.
-
The main unit must not be washed or soaked in water; it should only be wiped clean.
-
Do not disassemble or modify the device on your own; damage caused by misuse is not covered by the warranty.
IV. Installation Steps
-
Setting Up the Equipment: Place the litter box flat on the floor, leaving 10 cm of space on either side and 15 cm at the back to ensure it can rotate smoothly.
-
Install the sand-shedding footplate: Align the tray with the slot on the unit and secure it in place to minimize the amount of litter your cat carries around.
-
Add cat litter: Open the top lid and add sand, keeping the amount between the maximum and minimum marks—do not overfill or underfill.
-
Put it in a trash bag: Open the waste collection compartment at the bottom, lay the trash bag flat along the guide slots so it is securely in place, and close the compartment door.
-
Turn on the power: Connect the power supply; the device will perform a self-test, start up, the indicator light will turn on, and it will enter standby mode.
V. Description of Buttons and Indicator Lights
-
Power Button: Press briefly to wake up or put the device to sleep; press and hold for 3 seconds to turn the device on or off.
-
Manual Cleanup Button: Press briefly to start a full sand-cleaning cycle.
-
Reset Button: After a malfunction or freeze, press the reset button to restore normal operation.
-
The green light stays on: Normal standby.
-
The green light is flashing: Automatically cleaning.
-
Red light on/flashing: Fault Alarms (Foreign Object Jam, Abnormal Sand Level, Bag Full, Sensor Malfunction).
VI. Normal Usage Process
-
When a cat enters the basin, the device detects the presence of a living being and immediately locks and stops operation to ensure safety.
-
After the cat leaves, the device enters a delay mode (default 10 minutes, adjustable via the app) to allow the feces to clump together.
-
When the timer ends, the unit automatically rotates to sift the litter; the clean litter falls back into the hopper, while the waste falls into the sealed waste collection compartment.
-
Once cleaning is complete, the system automatically resets and returns to standby mode.
VII. Smart Features of the App
-
Automatically tracks how often your cat uses the litter box and how long each session lasts, allowing you to monitor your cat's health at any time.
-
Customizable cleanup delay and sleep mode.
-
Mobile notifications for malfunctions, full bags, and abnormal conditions.
-
Supports child lock, device status checks, and consumables alerts.
VIII. Routine Maintenance
-
Change the trash bag: Replace the bag promptly when the machine indicates it is full; we recommend replacing it every 1–7 days.
-
Changing the Cat Litter: Add sand as needed; it is recommended to completely replace the sand and clean the tank every 30 days.
-
Cleaning and Maintenance: After unplugging the machine, wipe down the body with a damp cloth; the footrest can be washed and air-dried; regularly remove hair from the mesh screen and debris from the crevices.
IX. Troubleshooting Common Problems
-
Red Light Alarm Does Not Flash: Abnormal sand flow or foreign object jam → Turn off the power to clean, adjust the sand flow, reset, and restart.
-
Does not recognize cats: Dust buildup on the sensor head is blocking the sensor → Wipe the sensor window.
-
Unusual Noises During Operation: If sand or debris gets stuck in the gaps → Turn off the power and clean it out.
-
Frequent False Starts: Direct sunlight, light interference → Move to a different location.
-
Not cleaned thoroughly: Damp cat litter or incorrect grain size → Replace with appropriate cat litter.
X. Warranty Information
The main unit is covered by a 1-year warranty; consumables such as trash bags, pedals, and adapters are not covered by the warranty. Damage caused by accidental exposure to water, unauthorized disassembly, or the use of incompatible cat litter is not covered by the warranty.
A Friendly Reminder: For new cats, we recommend unplugging the device for 1–3 days to let them get used to it. Once they’ve adapted to their new environment, switch to automatic mode—this will help them accept it more readily.






